Lanthanum trilactate: Vibrational spectroscopic study − infrared/Raman spectroscopy

In this study lanthanum trilactate was prepared by neutralization reaction of lactic acid and lanthanum oxide, purified and identified by X-ray powder diffraction. Infrared spectra (Mid-IR region 4000–650 cm⁻¹) and Raman spectra (Stokes region 4000–100 cm⁻¹) of the high quality crystalline samples have been recorded and presented for the first time. For comparison DFT calculations were performed using Gaussian 09 D.01 and agreement between predicted and measured spectral data has been achieved. Acquired information can be utilized for substance identification for example in various industrial applications or in biological systems.     

(3S,4S)-4-氨基-3-羟基-6-甲基庚酸的合成

价廉易得的L-亮氨酸先以苄基同时保护氨基及羧基得(S)-2-(二苄胺基)-4-甲基戊酸苄酯,进而在碱性条件下与乙腈发生亲核取代反应得(S)-4-(二苄胺基)-6-甲基-3-氧代庚腈,再经硼氢化钠选择性还原羰基得(3S,4S)-4-(二苄胺基)-3-羟基-6-甲基庚腈,用双氧水氧化得(3S,4S)-4-(二苄胺基)-3-羟基-6-甲基庚酸,最后在Pd(OH)2/C-H2作用下脱掉苄基得到(3S,4S)-4-氨基-3-羟基-6-甲基庚酸,即(3S,4S)-statine。整个合成路线总产率为33.6%。     

Lattice Boltzmann simulation of liquid–vapor system by incorporating a surface tension term

In this study,we investigate the pseudopotential multiphase model of lattice Boltzmann method(LBM)and incorporate a surface tension term to implement the particle interaction force.By using the Carnahan–Starling(CS)equation of state(EOS)with a proper critical pressure–density ratio,a density ratio over 160000 is obtained with satisfactory numerical stability.The added surface tension term offers a flexible choice to adjust the surface tension strength.Numerical tests of the Laplace rule are conducted,proving that smaller spurious velocity and better numerical stability can be acquired as the surface tension becomes stronger.Moreover,by wall adhesion and heterogeneous cavitation tests,the surface tension term shows its practical application in dealing with problems in which the surface tension plays an important role.     

Chemical versus Electrochemical Synthesis of Carbon Nano‐onion/Polypyrrole Composites for Supercapacitor Electrodes

The development of high‐surface‐area carbon electrodes with a defined pore size distribution and the incorporation of pseudo‐active materials to optimize the overall capacitance and conductivity without destroying the stability are at present important research areas. Composite electrodes of carbon nano‐onions (CNOs) and polypyrrole (Ppy) were fabricated to improve the specific capacitance of a supercapacitor. The carbon nanostructures were uniformly coated with Ppy by chemical polymerization or by electrochemical potentiostatic deposition to form homogenous composites or bilayers. The materials were characterized by transmission‐ and scanning electron microscopy, differential thermogravimetric analyses, FTIR spectroscopy, piezoelectric microgravimetry, and cyclic voltammetry. The composites show higher mechanical and electrochemical stabilities, with high specific capacitances of up to about 800 F g^?1 for the CNOs/SDS/Ppy composites (chemical synthesis) and about 1300 F g^?1 for the CNOs/Ppy bilayer (electrochemical deposition).     

Interactive Thermal Effects on Metal–Organic Framework Polymer Composite Membranes

Polymeric membranes are important tools for intensifying separation processes in chemical industries, concerning strategic tasks such as CO₂ sequestration, H₂ production, and water supply and disposal. Mixed‐matrix and supported membranes have been widely developed; recently many of them have been based on metal–organic frameworks (MOFs). However, most of the impacts MOFs have within the polymer matrix have yet to be determined. The effects related to thermal behavior arising from the combination of MOF ZIF‐8 and polysulfone have now been quantified. The catalyzed oxidation of the polymer is strongly affected by the MOF crystal size and distribution inside the membrane. A 16 wt % 140 nm‐sized ZIF‐8 loading causes a 40 % decrease in the observed activation energy of the polysulfone oxidation that takes place at a temperature (545 °C) 80 °C lower than in the raw polymer (625 °C).     

Orientation dependent size effects in thermal buckling and post-buckling of nanoplates with cubic anisotropy

In this work, a continuum model is presented for size and orientation dependent thermal buckling and post-buckling of anisotropic nanoplates considering surface and bulk residual stresses. The model with von-Karman nonlinear strains and material cubic anisotropy of single crystals contains two parameters that reflect the orientation effects. Using Ritz method, closed form solutions are given for buckling temperature and post-buckling deflections. Regarding self-instability states of nanoplates and their recovering at higher temperatures, an experiment is discussed based on low pressurized membranes to verify the predictions. For simply supported nanoplates, the size effects are lowest when they are aligned in [100] direction. When the edges get clamped, the orientation dependence is ignorable and the behavior becomes symmetric about [510] axis. The surface residual stress makes drastic increase in buckling temperature of thinner nanoplates for which a minimum thickness is pointed to stay far from material softening at higher temperatures. Deflection of [100]-oriented buckled nanoplates is higher than [110] ones but this reverses at higher temperatures. The results for long nanoplates show that the buckling mode numbers are changed by orientation which is verified by FEM.     

膜流动电位测试中Ag-AgCl电极的制备及稳定性研究

膜的动电特性研究中,往往采用流动电位方法。该方法中,Ag-Ag Cl测试电极的质量是影响测试准确性的关键要素。本文采用正交试验设计和方差分析,着重考察电解法制备Ag-Ag Cl电极过程中,电流强度(I)、氯化时间(t)、电解质溶液浓度(CHCl)、电极来源(n)、烘烤温度(T)、活化电极溶液浓度(CKCl)等因素对Ag-Ag Cl电极稳定性的影响。得到Ag-Ag Cl电极的最优制备参数为:电流密度3.0m A/cm2,氯化时间50min,盐酸浓度0.1mol·L-1,烘烤温度120℃,活化电极溶液(KCl)浓度0.001mol·L-1;最显著影响因素为电极来源,显著影响因素为氯化时间和烘烤温度。对最优条件组合下制备的AgAg Cl电极,进行了稳定性实验,结果表明:制备的电极具有较好的稳定性,24h内电极电位漂移量小于0.10mv,7天内电极电位漂移量小于0.2mv;在聚偏氟乙烯中空纤维超滤膜流动电位测试中,流动电位与流动压差具有良好的线性和可重复性,回归曲线R20.99,变化规律符合Helmholtz-Smoluehowski公式,可以较好满足膜的流动电位测试要求。     

Intermolecular Stetter reaction of aromatic aldehydes with (E)-(2-nitrovinyl)cyclohexane induced by N-heterocyclic carbene and thiourea

Intermolecular Stetter reaction of aromatic aldehydes with (E)-(2-nitrovinyl)cyclohexane catalyzed by thiazolium A has been developed. The reaction rate and efficiency are profoundly impacted by the presence of thiourea B. The reaction affords moderate to good yields of the Stetter product. Some factors influencing yield were discussed.     

聚乳酸组织工程支架结构的精密调控

采用糖球模板法结合热致相分离技术,制备了孔径尺寸、内连通度及孔隙率高度可控的左旋聚乳酸(PLLA)支架材料,并通过扫描电镜(SEM)、红外光谱(FTIR)以及示差扫描量热法(DSC)对其空间结构及性能进行了系统研究.支架材料孔径从50μm到800μm及内连通孔径从10μm到200μm连续可调,微观孔壁结构根据不同溶剂可形成各异的微纳米结构.支架的制备对PLLA化学结构无显著影响,但相分离过程会不同程度地降低PLLA的结晶度.     

Mechanism of Insertion Reactions between Silylenoid H2SiLiF and GeH3R (R =F,OH, NH2): a Theoretical Study

Theoretical investigations on the insertion reaction mechanisms of three- membered-ring silylenoid H2 Si Li F with GeH 3R(R = F, OH, NH2) have been systematically carried out by combined density functional theory(DFT) and ab initio quantum chemical calculations. The geometries of all stationary points for these reactions were optimized using the B3 LYP method and then the QCISD method was used to calculate the single-point energies. The calculated results indicate that, there are one precursor complex(Q), one transition state(TS), and one intermediate(IM) which connect the reactants and the products along the potential energy surface. The insertion reactions of three-membered-ring silylenoid with Ge H3 R proceed in a concerted manner, forming H2RSi-Ge H3 and Li F. The calculated potential energy barriers of the three reactions are 29.17, 30.90, and 54.07 k J/mol, and the reaction energies for the three reactions are –127.05, –116.91, and –103.31 k J/mol, respectively. The insertion reactions in solvents are similar to those in vacuum. Under the same situation, the insertion reactions should occur easily in the following order: GeH 3-F GeH 3-OH GeH 3-NH2. The elucidations of the mechanism of these insertion reactions provided a new mode of silicon-germanium bond formation.